/SCWM/SSCC
28 messages in this application area
Each row lists the SAP message number and the English message text as provided in the source extract. Use anchors (e.g. #msg-123) to deep-link to a specific message on this page.
| Message | Message text |
|---|---|
| 1 | Parameter &1 was not entered |
| 2 | Output field is too short (&1) to add a check digit (&2) |
| 3 | Calculation method &1 is not implemented for a check digit |
| 4 | Value &1 should be numeric but it also contains non-numeric characters |
| 5 | Enter an SSCC to be checked |
| 6 | ILN basis number not found for warehouse number &3 |
| 7 | SSCC &1 does not have &3 characters, it has &2 characters |
| 8 | ILN basis number must be maintained |
| 9 | Maintain the external number range interval |
| 10 | &1 is part of an internal number range interval - Nr. not permitted |
| 11 | HU Type (&2) in SSCC &1 is different from the required HU type (&3) |
| 12 | ILN basis number &1 is too long with &2 characters (max. &3 characters) |
| 13 | ILN basis number &2 in SSCC &1 is different from the required number (&3) |
| 14 | Sequential number &2 in SSCC &1 is not in interval &4 for object &3 |
| 15 | The check digit in SSCC &1 is incorrect. &2 is correct |
| 16 | Maintain the internal number range interval |
| 17 | Customizing is locked by another user. No access possible |
| 18 | A new number from no.rnge obj. &1 is too long with &2 char. (max. &3 ch.) |
| 19 | No external interval is maintained for internal basis number &1 |
| 20 | ILN basis number cannot only contain zeros |
| 50 | Maintain a number range object |
| 51 | Number range object &1 does not exist |
| 52 | Internal error during length check. Number cannot be checked |
| 54 | Number range object &1 is too long to generate an SSCC |
| 55 | The combination of number range object and ILN with &1 chars is too long |
| 56 | The combination of number range object and ILN with &1 chars is too short |
| 57 | GLN does not begin the SSCC and is therefore one character too long |
| 58 | GLN (&1) and sequence number (&2) give a SSCC with more than 18 digits |
Message texts are shown for technical reference in consulting and education contexts. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA and other SAP product and service names are trademarks or registered trademarks of SAP SE in Germany and other countries.