/SCWM/PI_APPL
219 messages in this application area
Each row lists the SAP message number and the English message text as provided in the source extract. Use anchors (e.g. #msg-123) to deep-link to a specific message on this page.
| Message | Message text |
|---|---|
| 1 | Inventory areas (PI area) could not be created |
| 2 | Inventory areas (PI area) not found |
| 3 | Error creating warehouse order |
| 4 | Item &1: Document &3 &4 is already active for storage bin &2 |
| 5 | Item &1: Document &4 is already active for storage bin &2, product &3 |
| 6 | Item &1: Document &4 is already active for storage bin &2, HU &3 |
| 7 | Warehouse number was not transferred |
| 8 | Storage bin was not transferred |
| 9 | No entry found |
| 10 | No warehouse order transferred |
| 11 | Specified inventory area &1 does not exist |
| 12 | Could not determine parent for HU &1 |
| 13 | No factory calendar maintained for warehouse &1 |
| 14 | No period variant maintained for warehouse &1 |
| 15 | Make entries in the empty fields |
| 16 | Call contains errors; parameters were not transferred correctly |
| 17 | Error while mapping &1 |
| 18 | No currency maintained for warehouse &1 |
| 19 | Call for item &1 contains errors; parameters not transferred correctly |
| 20 | Material &1, party entitled to dispose &2 does not exist |
| 21 | Exchange rate &1 to &2 not maintained or incorrect |
| 22 | Enter warehouse number |
| 23 | No entry maint. for whse no. &1 and pty resp. &2 in RFC assignment table |
| 24 | MATID was not transferred |
| 25 | Party entitled was not transferred |
| 26 | Count date/time was not transferred |
| 27 | No products maintained for warehouse number &1 and party entitled &2 |
| 28 | Error while writing data |
| 29 | Error while reading data from logical system &1 |
| 30 | Changes have been accepted |
| 31 | No result from query |
| 32 | Call contains errors; parameters not transferred correctly |
| 33 | Valuation data was saved |
| 34 | Search criteria not fully specified |
| 35 | Conversion error warehouse number &1 (time zone or factory calendar) |
| 36 | You are not authorized to use transaction & |
| 37 | No logical system maintained for party entitled to dispose &1 |
| 38 | Selection produced no results (see log for details) |
| 39 | An active physical inventory document exists for storage bin &1 |
| 40 | Do not specify storage bins in the case of complete physical inventory |
| 41 | No valid rows marked |
| 42 | Document &2 &3 &4 has already been created for storage bin &1 |
| 43 | Quantities/HUs were entered even though storage bin &1 is empty |
| 44 | No dummy HU for storage bin &1; system error |
| 45 | No dummy HU was found for product &1 with a delivery reference |
| 46 | Storage bin was not transferred (item &1) |
| 47 | Quantities/HUs were entered even though HU &1 is empty |
| 48 | No higher-level location/HU was entered for HU &1 |
| 49 | Party entitled to dispose and/or owner missing in item &1 |
| 50 | Party entitled to dispose and owner are identical (item &1, usage &2) |
| 51 | Phys. inv. doc. &1, year &2, item &3 is already locked by user &4 |
| 52 | Number and/or item of sales order is missing (item &1, type &2) |
| 53 | Project number is missing (item &1, type &2) |
| 54 | No item entered for projects (item &1, type &2) |
| 55 | No product entered or no product found (item &1) |
| 56 | Storage bin &1 does not exist in warehouse &2 (item &3) |
| 57 | &1 &2 |
| 58 | Count date that was entered lies in the future |
| 59 | No physical inventory areas were found |
| 60 | HU status was entered although storage bin &1 is empty |
| 61 | HU status was entered although HU &1 is empty |
| 62 | Quantities were entered although status was set for HU &1 |
| 63 | Physical inventory procedure &1 that was entered is not permitted |
| 64 | Physical inventory procedure &1 that was entered coudl not be determined |
| 65 | Error determining PI year: warehouse &1 period var. &2 incorrect/missing |
| 66 | Error occurred in framework |
| 67 | Error occurred during selection; see log |
| 68 | No messages were found |
| 69 | No storage bins found for activity area &1 |
| 70 | Product &1 is complete in activity area &2 |
| 71 | Product &1 is incomplete in activity area &2 |
| 72 | &3 phys. inv. document(s) were read for product &1, phys. inv. area &2 |
| 73 | Missing index number (item &1) |
| 74 | Physical inventory document &1/&2/&3 could not be read |
| 75 | Document &2 &3 is already planned for storage bin &1 |
| 76 | Document &3 / &4 is already active for storage bin &1, product &2 |
| 77 | Enter a valid month |
| 78 | Enter a day and month |
| 79 | Enter a valid data for the month &1 |
| 80 | Product &1 - No stock exists |
| 81 | No periodicity maintained for CC indicator &2 in warehouse &1 |
| 82 | No CC indicator was transferred |
| 83 | System error: Physical incentory procedure &1 inconsistent |
| 84 | You do not have display authorization for the PI in warehouse number &1 |
| 85 | You do not have change authorization for the PI in warehouse number &1 |
| 86 | Physical inventory procedure &1 not permitted in phys. inv. area &2 |
| 87 | No plant/storage location determined for ERP system |
| 88 | Product &1, warehouse number &2 does not exist |
| 89 | No ERP stock determined for plant &1 storage location &2 |
| 90 | Error while mapping for party entitled &1, stock type &2 |
| 91 | Do you want to delete the entries for warehouse &1 party entitled &2? |
| 92 | No data was changed |
| 93 | Entries for warehouse &1 party entitled &2 deleted |
| 94 | Error while deleting data |
| 95 | Product does not exist (in LIME). Error while creating product |
| 96 | No settings exist for MRL periods in physical inventory area &1 |
| 97 | Error while calculating dates with factory calendar &1 |
| 98 | Storage bin &1 still outside of MRL period |
| 99 | Special stock indicator &1 currently not supported |
| 100 | Stock category &1 not supported! Matl number &2 plant &3 storage loc. &4 |
| 101 | Valuation data for product &1 &2 does not exist or is inconsistent |
| 102 | Enter physical inventory procedure |
| 103 | No stock for product &1, party entitled to dispose &2 |
| 104 | Storage bin &1 was already inventoried in the physical inventory year |
| 105 | Material &1 entitled &2 was already inventoried in the physical inv. year |
| 106 | No referencing physical inventory document with identification &1 exists |
| 107 | Conversion error of time zone for warehouse number &1 |
| 108 | No party entitled to dispose found for warehouse number &1 |
| 109 | Special stock &1 not supported! Material number &2 plant &3 stor.loc. &4 |
| 110 | Error: &1 program: &2/&3 line: &4 |
| 111 | Material document &1 successfully created in target system &2 |
| 112 | Read EWM stock |
| 113 | Read ERP stock |
| 114 | Determine product &1 differences |
| 115 | &2 WME products read for warehouse number &1 |
| 116 | No errors found during simulation |
| 117 | No data exists. Activity canceled |
| 118 | Stock in WM for warehouse number &1 party entitled to dispose &2 was read |
| 119 | No authorization for warehouse number &1 party entitled to dispose &2 |
| 120 | Difference quantity could not be determined |
| 121 | Warehouse number &1 product &2:LIME diff. base UOM in stock items! |
| 122 | No stock found for party entitled to dispose &1 |
| 123 | Selection produced &1 results in total |
| 124 | HU &1. Status was already set on a higher level |
| 125 | Document &1 &2 posted |
| 126 | Item &1, count item &2: Count entries are missing |
| 127 | Item &1, count item &2: Count quantity entered is negative |
| 128 | Count item &1: Count quantity entered is outside the tolerance |
| 129 | Count item &1: Error determining the tolerance values |
| 130 | Error in SAP-internal BAdI /LIME/PI_CORE; Action was cancelled |
| 131 | Priority of physical inventory document &1 &2 item &3 was changed to &4 |
| 132 | Item &1: Error determining difference |
| 133 | Storage bin &1: Open warehouse task &2, lock not set |
| 134 | Storage bin &1 product &2: Open warehouse task &3, lock not set |
| 135 | Storage bin &1 is not assigned to an activity area |
| 136 | Material &1 entitled &2 was already inventoried in the Storage bin &3 |
| 137 | Phys.Inv.Doc. &1 item &2; count date is before WHO Start date |
| 138 | Process block profile &1 prevents Physical Inventory for product &2 |
| 139 | Document &1 &2. Count date should not be older then creation date |
| 140 | Correct your entries prior to saving |
| 141 | Errors occurred during processing (see log for details) |
| 142 | First enter a HU number |
| 143 | Select only one item |
| 144 | Select at least one item |
| 145 | Warnings arose during processing (see log for details) |
| 146 | Document saved successfully |
| 147 | Document &1 must be 'active' for processing in this dialog |
| 148 | Enter an owner |
| 149 | Specify a material number for batch &1 also |
| 150 | Material &1 is not subject to batch management requirement. Delete entry! |
| 151 | Count data already recorded for document &1 &2 |
| 152 | Unable to record count data for document &1 &2 |
| 153 | You do not have authorization to create PI documents in warehouse &1 |
| 154 | You do not have display authorization for the PI in warehouse &1 |
| 155 | You do not have change authorization for the PI in warehouse &1 |
| 156 | Non-evaluated data was saved |
| 157 | Record count data for document &1 &2 using transaction /SCWM/PI_PROCESS |
| 158 | Object to be created for product &1 exists multiple times in call |
| 159 | Object to be created in item &1 exists multiple times in call |
| 160 | Specify cycle counting indicator |
| 161 | No errors occurred while posting (test mode) in system &1 |
| 162 | No count results could be recorded for warehouse task &1 |
| 163 | No count results could be recorded for PI document &1 &2 or WO &3 |
| 164 | Enter either a physical inventory document or a warehouse order |
| 165 | Entry "&1" (&2) after convertion is too long. Please check your entry |
| 166 | No authorization for warehouse number &1 activity area &2 |
| 167 | No authorization for warehouse number &1 activity area &2 entitled &3 |
| 168 | Document &1, Line &2 - missing entry of count data (qty/unit) |
| 169 | Party entitled to dispose &1 is not allowed for product &2 |
| 170 | No EWM stock read for entered parameters |
| 171 | Quant Attributes are missing for storage bin &1 HU &2 product &3 |
| 172 | Inconsistency for product &1: LIME UoM &2, EWM UoM &3 |
| 173 | Product &1: EWM Base UoM &2, ERP Base UoM &3 |
| 174 | Prepare EWM stock data |
| 175 | Product &1: EWM BW UoM &2, ERP BW UoM &3 |
| 176 | PI document &1 Item &2: Enter a valid processor |
| 177 | Enter a valid processor |
| 178 | Item &1: Physical inventory only possible for subbins of main bin &2 |
| 179 | No changes were made |
| 180 | Processor &1 could not be assigned to group &2 |
| 181 | Assignment of processor &1 to group &2 could not be deleted |
| 182 | Processor (BP) &1 could not be locked |
| 183 | Action was executed successfully |
| 184 | You have selected more than one checkbox for HU &1 |
| 185 | Product &1 was removed from the list: lock could not be set. |
| 186 | Enter a valid warehouse number |
| 187 | Enter a document year previous to &1 |
| 188 | The selected data could not be read |
| 189 | No data sets selected for deletion |
| 190 | Do you really want to delete the selected &1 data sets? |
| 191 | Selection produced &1 results for party entitled to dispose &2 |
| 192 | Only migrated data sets can be deleted for year &1 |
| 193 | Enter a positive integer |
| 194 | Specify a packaging material for HU &1 |
| 195 | HU &1 is found on multiple bins |
| 196 | Specify the content of HU &1 |
| 197 | Physical inventory document &1 is currently processed |
| 198 | Enter a valid packaging material for HU &1 |
| 199 | Multiple units of measure of product &1 are not allowed on the same bin |
| 200 | Product &1 on bin &2 is counted in base UoM |
| 201 | Status of warehouse order &1 changed to "In Process" |
| 202 | Can't go back to a date before &1 days; the date is before Jan. 1st, 0001 |
| 203 | The number range for object &1 is almost exhausted |
| 204 | The last number has been assigned from the number range object &1 |
| 205 | Could not find a number from the number range object &1 |
| 206 | Collect queue data |
| 207 | Count Reference &1 for document &2 &3 is not valid. |
| 210 | Multiple rows selected; select only one row |
| 215 | Storage bin &1 will not be considered during completeness check (BAdI) |
| 216 | Book entries are missing for item &1, book item &2. |
| 217 | The book quantity entered for item &1, book item &2 is negative. |
| 218 | The quantity or unit is missing for document &1, line &2. |
| 219 | HU &1 for book item must exist and can’t be empty or complete. |
| 220 | The document number is missing for item &1. |
| 221 | The document year is missing for item &1. |
| 222 | The document item is missing for item &1. |
| 223 | Can't find book inventory for physical inventory item &1 |
| 224 | You aren't authorized to change book inventory in warehouse &1 |
| 712 | Logical system &1. Function module &2 does not exist. |
Message texts are shown for technical reference in consulting and education contexts. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA and other SAP product and service names are trademarks or registered trademarks of SAP SE in Germany and other countries.