/SCWM/ELS
56 messages in this application area
Each row lists the SAP message number and the English message text as provided in the source extract. Use anchors (e.g. #msg-123) to deep-link to a specific message on this page.
| Message | Message text |
|---|---|
| 1 | Work Step &1 (&2): not defined |
| 2 | Work step &1 (&2 &3); define either a formula or constant |
| 3 | Work step &1 (&2 &3): Define a unit for the constant |
| 4 | Work step &1 (&2 &3): Unit and formula not allowed at same time |
| 5 | Work step &1 (&2 &3): Define and Activate Condition &4 |
| 6 | Work step &1 (&2 &3): Define and activate formula &4 |
| 7 | Work step sequence &1 (&2 &3): Define work step or work step sequence |
| 8 | Work step sequence &1 (&2 &3): Work step &4 not defined |
| 9 | Work step sequence &1 (&2 &3): Work step sequence &4 not defined |
| 10 | Work step sequence &1 (&2) forms cycle |
| 11 | Work step &1 (&2 &3): &4 is not a unit of time |
| 12 | Selection &1 &2 &3 &4: Work step sequence not defined |
| 13 | Selection &1 &2 &3 &4: Multiple active |
| 14 | Selection &1 &2: Work step sequence contains invalid condition &3 |
| 15 | Selection &1 &2: Work step sequence contains invalid formula &3 |
| 16 | Work step &1 (&2 &3): Only positive constants are allowed |
| 17 | Direct ELS definition &1 &2 &3 &4 not possible |
| 19 | Engineered Labor Standards Calculation |
| 20 | Work Steps for Selection &1 &2 &3 &4: |
| 21 | Work step sequence: &1 - step: &2 - &3 |
| 22 | Condition: &1 - constant: &2 - unit: &3 - formula &4 |
| 23 | Error while converting unit &1 to &2 |
| 24 | Result of condition &1: &2 |
| 25 | Result of formula &1: &2 &3 |
| 26 | Overall result: &1 &2 (ELS was calculated: &3) |
| 27 | You have not selected a work step sequence |
| 28 | Data has been saved |
| 29 | Time unit not available (workload, warehouse number control) |
| 30 | BAdI active for &1 |
| 31 | BAdI: SAP implementation will be executed |
| 32 | BAdI: SAP implementation will not be executed |
| 33 | BAdI implementation will be executed |
| 34 | BAdI: Error while executing implementation |
| 35 | BAdI: Overall result: &1 &2 |
| 37 | You do not have authorization for &1 |
| 39 | Generates for 'Direct ELS Definition' |
| 43 | Data already exists |
| 45 | Source file &1 loaded successfully |
| 46 | No access to source file &1 |
| 47 | Error when uploading file |
| 48 | No separator (',' or ';') in file |
| 49 | Format source file &1 is incorrect; unable to upload &2 data rows |
| 50 | Source file does not exist |
| 51 | No data available |
| 52 | Key fields of the formula are empty (warehouse number, formula name, ...) |
| 53 | Data transfer completed |
| 54 | Formula &1 &2 &3 &4 could not be deleted |
| 55 | Work step &1 (&2): Key fields not defined |
| 56 | Work step sequence &1 (&2): Key fields not defined |
| 57 | Selection &1 &2 &3 &4: Warehouse number or object type not defined |
| 58 | Condition evaluation not possible; no Boolean result |
| 59 | Formula evaluation not possible; no numerical result |
| 60 | External process step &1 does not exist |
| 61 | Object type &1 is not defined |
| 62 | Sequential number incorrect: '<1' or entry with 'number-1' is missing |
| 63 | Selection &1 &2 &3 &4: Step not defined, although activ. area is defined |
Message texts are shown for technical reference in consulting and education contexts. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA and other SAP product and service names are trademarks or registered trademarks of SAP SE in Germany and other countries.