/SCWM/DYNBIN
70 messages in this application area
Each row lists the SAP message number and the English message text as provided in the source extract. Use anchors (e.g. #msg-123) to deep-link to a specific message on this page.
| Message | Message text |
|---|---|
| 0 | Internal error: &1 |
| 9 | No flexible bin area found |
| 10 | No matching flexible bin area found for &1/&2 |
| 11 | More than one matching flexible bin area found for &1/&2 |
| 30 | No matching pattern found for &1 |
| 31 | Pattern &1 failed: Check &2 for flexible bin &3 |
| 32 | Pattern &1: Please check pattern for flexible bin &3 |
| 33 | &1 - (&4) for flexible bin &2 are wrong. Check pattern &3 |
| 34 | Pattern check &1 failed for flexible bin &2 |
| 40 | Flexible bin &1 overlaps flexible bin &2 by &3% |
| 41 | Flexible bin &1 overlaps blocked area &2 (&3) by &4% |
| 42 | Storage bin/flexible bin &1 already exists |
| 43 | Storage bin &1/&2 is not a flexible bin (storage behavior <> 3) |
| 44 | Flexible bin &1 lies &2% outside of flexible storage bin area &3 |
| 45 | Value of field &1 must be smaller than of field &2 |
| 46 | &1 and &2 or &3 and &4 must be different |
| 47 | Invalid character &1 used for flexible bin &2 |
| 48 | No valid flexible bin area and pattern found for storage bin &1 |
| 50 | Customer specific pattern &1 not returned with all required values |
| 51 | BAdI &1 for customer specific pattern not implemented |
| 52 | BAdI &1 for customer specific pattern returns CHECK FAILED |
| 53 | Customer specific area &1 not returned with all required values |
| 70 | You are not allowed to create flexible bins in transaction /SCWM/LS01 |
| 71 | You cannot use storage type &1 for flexible bin creation in /SCWM/LS01 |
| 72 | You cannot use a flexible strg. type for strg. bin creation WH &1 Sq &2 |
| 100 | Pattern has a total length of &1 (maximum 18) |
| 101 | Error accessing function module: &1 parameter: &2 &3 &4 |
| 125 | Length of field &1 exceeds pattern &2 |
| 126 | Content of field &1 &2 does not correspond with pattern &3 |
| 127 | Value of field &1 &2 is bigger than of field &3 - &4 |
| 128 | For field &1 &2 enter UoM &3 in IMG "Def. Warehouse Number Control" |
| 129 | &1 is not a valid unit of weight |
| 130 | &1 is not a valid unit of volume |
| 131 | Length of flex. bin area ID &1 matches pattern &2 prefix length &3 |
| 132 | There are blocked cells for flexible bin area &1 and warehouse &2 |
| 133 | There are flexible bins for flexible bin area &1 and warehouse &2 |
| 134 | Flexible bin area &1 for warehouse &2 is being edited, therefore blocked |
| 135 | Flexible bin area &1 not allowed - already in use for ST w. behavior <> 3 |
| 136 | Blocked cell(s) &1 &2 outside flex. bin area range &3 to &4 |
| 137 | Length of &1 flex.bin area &2 doesn't match length of&3 prefix pattern &4 |
| 138 | Flex. bin area &1 should only contain [0..9] and [A..Z] characters |
| 139 | Inconsistent blocked cell &1 - Saving not possible |
| 140 | Inconsistent flexible bin area &1 - Saving not possible |
| 141 | No flexible bin area data set for flexible bin area &1 and warehouse &2 |
| 142 | Value of field &1 &2 is equal or bigger than of field &3 - &4 |
| 150 | Error generating a GUID |
| 151 | Error while calling function module &1 |
| 160 | Enter a warehouse number |
| 161 | No storage type entered. Set the flag or enter a storage type |
| 162 | Flexible bin &1 was not deleted. Open PI document must be closed first |
| 163 | Starting flexible bin deletion in simulation mode |
| 164 | Flexible bin &1 empty and deleted |
| 165 | Flexible bin &1 was not deleted. Open warehouse task must be closed first |
| 166 | Flexible bin &1 was not deleted. An error occured |
| 167 | Flexible bin &1 found and empty |
| 180 | Flexible bin not allowed for prefix &1 and storage type &2. |
| 181 | Prefix not correct for custom-defined flexible bin areas |
| 182 | Data not correctly maintained |
| 183 | Cell capacity must be between 1 and 10 |
| 184 | Blocked cells not allowed for custom-defined flexible bin patterns |
| 185 | Customer pattern &1 not implemented |
| 186 | Pattern does not match PPPP#XXXXXX#YYYYYY |
| 187 | Wrong pattern ID |
| 188 | Prefix in wrong format: 4 digits required, given: &1 |
| 189 | x-coordinates in wrong format: 6 digits required, given: &1 |
| 190 | x-start in wrong format: &1 |
| 191 | x-end in wrong format: &1 |
| 192 | y-coordinates in wrong format: 6 digits required. given: &1 |
| 193 | y-start in wrong format: &1 |
| 194 | y-end in wrong format: &1 |
Message texts are shown for technical reference in consulting and education contexts. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA and other SAP product and service names are trademarks or registered trademarks of SAP SE in Germany and other countries.