/SCMTMS/TAL

150 messages in this application area

Each row lists the SAP message number and the English message text as provided in the source extract. Use anchors (e.g. #msg-123) to deep-link to a specific message on this page.

Back to module overview All areas

SAP application messages for this area
Message	Message text
1	Minimum value is greater than maximum value
2	Start date is after end date
3	Bucket type of carriers is different; only relative change is possible
4	Maximum value is lower than current value for one or several allocations
5	Maximum value is lower than minimum value; no changes are possible
6	Minimum value is lower than 0; value is set to 0
7	Maximum value is lower than 0; value is set to 0
8	Customizing for allocations cannot be read
9	Allocation could not be created; enter a carrier
10	Decimal values are rounded to integers when the unit of measure is "each"
11	Hierarchy inconsistency
12	Hierarchy check error
13	Allocations are not created if planning period or capacity is missing
14	Allocation &1 &2 &3 &4 already exists
15	Incorrect transp. orientation type; no allocations are created
16	Allocation could not be created; define a trade lane
17	Allocation &2 was not created; allocation &1 contains conflicting data
20	Business partner/supplier & does not exist
21	No valid source location/transportation zone was entered
22	No valid destination location/transportation zone was entered
23	No valid business partner/supplier was entered
24	No valid means of transport was entered
25	Change value is greater than maximum value
26	Allocation overbooked
27	Order &1 cannot be booked
28	Error during allocation update for order &1
29	Validity date must cover a complete horizon (from/to must be filled)
30	Transp. lane from &1 to &2 and MTr &3; incompl. allocation data
31	No transportation lanes could be found based on selection criteria
32	Planning period '&' does not completely fit into the validity period
33	Allocation from &1 to &2 with MTr &3 and carrier &4 could not be created
34	Validity period is shorter than the chosen planning period
35	Specify a source transportation zone for orientation "O" ("Outbound")
36	Specify a destination transportation zone for orientation "I" ("Inbound")
37	Specify identical transportation zones for orientation "W" ("Within")
38	Number of periods &1 exceeds limit of &2; specify shorter range of dates
40	Values have been changed due to their unit of measure
41	Allocation type &1 is schedule-based; select a different allocation type
42	Too many combinations for allocations found; specify sel. criteria
43	Validity interval is too large; specify an interval smaller than 68 years
45	Unit of total quantity for &2 cannot be converted
46	You have to activate usage of allocations
47	You have to activate usage of allocations
48	&1 buckets deleted
49	Only A, F and O orientations are valid for lane reference
50	TRMID &1: bucket type does not fit to requested validity interval
51	Change of &1 violates bucket &2 of allocation &3
52	Allocation &1: &2 buckets were updated with existing orders
53	Quantity aggregation postponed for &1 buckets
54	Carrier &1 has no capacity for &2 according to allocation &3 (&4)
55	Not all buckets could be generated for allocation &1
56	Bucket &1 of allocation &2 has overwritten &3 existing bucket(s)
57	You have to activate usage of allocations
58	Allocation creation interrupted
59	Start time is after end time
60	Bucket has been created in the past
61	Sub-bucket rate must be between 0 and 100%
62	Sum of sub-bucket proportions has to be greater than zero
63	Process terminated due to failed locking
64	&1 trade lanes skipped; allocation checkbox on trade lanes not selected
65	Cannot determine allocation-relevant quantities for &1
66	Allocation type &1 is not used for attributes
67	Specify the validity dates
68	Allocation &1 already exists for &2
69	Error while generating allocation
70	Allocation &1 generated for &2
71	Enter an allocation type for schedule type &1
72	No matching carrier could be found; allocation not created
73	Allocation locked; your changes to &1 buckets will be applied later
74	Allocation locked; your changes to &1 allocations will be applied later
76	Enter a valid allocation ID; allocation ID &1 invalid
77	Enter a validity start date
78	Enter a validity end date
79	Deletion is not possible; departure referenced by bucket &1 exists
100	Transaction error; data cannot be saved
101	Missing parameter: &1
102	No bucket of type &1 fits in the specified time interval
103	No valid trade lane found; no allocation created
104	No matching transportation lane found; no allocations created
106	Allocation roots processed
107	Processing buckets of allocation &1/&2
108	Starting creation of allocations
109	Checking transportation lanes for allocation geographies
110	Bucket processing status: &1%
111	Unit &1 is not supported
112	Allocation import file could not be read
113	Error while parsing allocation import file
114	Bucket processing finished
115	Insufficient definition of parameters
116	Orientation "Along" cannot be used
117	Orientation "From" cannot be used
118	Orientation "Outbound" cannot be used
119	Orientation "To" cannot be used
120	Orientation "Inbound" cannot be used
121	Orientation "Within" cannot be used
122	Carrier &1 cannot be found
123	Invalid bucket type &1
124	&1 buckets have been deleted
125	&1 buckets have been created
126	Corresponding allocations already exist
127	&1 successfully read
128	XML data has been parsed successfully
129	&1 allocations found in the upload file
130	&1 buckets found in the upload file
131	&1 allocations created
132	Allocation split: &1 allocations have been created
133	Bucket could not be added to allocation &1
134	You cannot delete bucket &1 (&2); this would cause an allocation split
135	&1 allocations deleted
136	&1 buckets updated
137	&1 allocations updated
139	Could not create attributes for allocation &1; &2 and &3 are identical
140	&1 attributes created or changed
141	&1 attributes created
142	Invalid TAL type &1
143	Error while parsing &1 in the allocation import file
144	Select one attribute
145	Attribute deleted
150	Details have been copied to &1 buckets
151	Details can only be shown for one entry; select just one
152	Details can only be copied from one entry; select just one
155	Allocation cannot be changed; business partner is blocked
156	Allocation cannot be created; business partner is blocked
157	Shipping type &1 does not exist
158	Contract basis &1 does not exist
160	*********TAL Customizing*********************************************
161	Default type already exists
162	Transportation mode &1 does not exist
163	Specify the unit of measure for carrier selection
164	You cannot use number range &1 for allocations
165	Number range object &1 is not valid; contact your system administrator
200	You are not authorized to use allocation &1
201	You are not authorized to edit allocation &1
202	You are not authorized to create allocation &1
203	You are not authorized to delete allocation &1
300	Allocation conversion report started in system &1, client &2
301	Allocation &1 converted
302	Allocation &1 converted to new allocation &2
303	&1 entries added to table &2
304	Error in number range &1; allocation conversion report failed
305	&1: It is not possible to convert flight schedule-based allocations
306	Simulation mode; changes not saved
307	Allocation &1: &2 buckets converted
308	Allocation &1: &2 object references converted
309	Allocation &1, bucket from &2, dimension &3 not supported
310	&1: Allocation already exists with ID &2
311	Allocation conversion report failed; changes could not be saved
312	Saving package &1
313	Starting allocation conversion report for package &1 with &2 entries
314	Validity dates adjusted by the system; TAL buckets outside the validity

Message texts are shown for technical reference in consulting and education contexts. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA and other SAP product and service names are trademarks or registered trademarks of SAP SE in Germany and other countries.