/SCMTMS/SFM_OPT
36 messages in this application area
Each row lists the SAP message number and the English message text as provided in the source extract. Use anchors (e.g. #msg-123) to deep-link to a specific message on this page.
| Message | Message text |
|---|---|
| 1 | No carriers sent for optimization |
| 3 | No RFQ items sent for optimization |
| 4 | No responses sent for optimization |
| 5 | Optimizer time limit is &1 seconds; time limit must be positive |
| 10 | Cap. of RFQ item &2 in dim. &4 for carrier &1 is below min. cap. of &3 |
| 13 | Minimum target share for carrier &1 is &3; must be between 0% and 100% |
| 14 | Maximum target share for carrier &1 is &3; must be between 0% and 100% |
| 15 | Minimum target share &3 for carrier &1 is greater than maximum share |
| 20 | Rates from carrier &1 for RFQ item &2 invalid; rates must be positive |
| 22 | Requested capacity &2 of RFQ item &1 must be greater than zero |
| 23 | RFQ item &1 invalid; non-delivery costs &2 must be greater than zero |
| 28 | Inconsistencies in capacity restriction for carrier &1 |
| 29 | Capacity of RFQ item &2 in dimension &4 for carrier &1 is invalid |
| 32 | Inconsistencies in capacity restrictions |
| 33 | No responses for freight agreement RFQ item &1 |
| 34 | Inconsistencies in capacity restrictions |
| 35 | Sum of minimum target shares cannot be greater than 100% |
| 38 | Inconsistencies in target share &1 |
| 39 | Inconsistencies in capacity restrictions |
| 43 | Non-delivery costs of RFQ item &1 cannot be zero |
| 46 | Enter a quantity for dimension &2 of RFQ item &1 |
| 47 | Enter a quantity for dimension &2 of RFQ item &1 |
| 48 | Performance critical number of continuous moves reached |
| 49 | RFQ item &1: Min. no. of carriers (&2) higher than no. of carriers (&3) |
| 50 | RFQ item &1: Max. no. of carriers (&2) higher than no. of carriers (&3) |
| 51 | Item &1: Min. no. of carriers (&2) higher than max. no. of carriers (&3) |
| 99 | Calling &1 for not supported application &2, only supporting &3 |
| 600 | Error during consistency checks; contact technical support |
| 801 | Starting optimizer run |
| 802 | Loading parameters |
| 803 | Loading planning data |
| 804 | Checking consistency |
| 811 | Writing results |
| 812 | Finishing optimizer run |
| 820 | Starting optimizer |
| 999 | Calling &1 for not supported application &2, only supporting &3 |
Message texts are shown for technical reference in consulting and education contexts. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA and other SAP product and service names are trademarks or registered trademarks of SAP SE in Germany and other countries.