/SCMTMS/TCCS_TMPL
112 mesaj (bu uygulama alanında)
Her satırda SAP mesaj numarası ve kaynak çıktısındaki İngilizce metin yer alır. Derin bağlantı için örn. #msg-123 kullanın.
| Mesaj | Mesaj metni |
|---|---|
| 1 | Charge type is mandatory for line &1 |
| 2 | Template name not specified; delete this template and create a new one |
| 3 | Calculation sheet template &1: Charge usage not specified |
| 4 | Calculation sheet template &1 contains no items |
| 5 | Line no. &1 invalid with non-numeric characters; delete line and recreate |
| 6 | Line number is not specified; delete line and create again |
| 7 | Line no. &1 is <=10 the first sum line; delete line and enter >10 |
| 8 | Sum line &1: Enter reference-from or reference-to line, respectively |
| 9 | Reference-from line &1 must be greater than sum line &2 |
| 10 | Reference-to line &1 must be greater than sum line &2 |
| 11 | Reference-to line is required for subtotal line &1 |
| 12 | Reference-from line &1 must be less than subtotal line &2 |
| 13 | Reference-to line &1 must be less than subtotal line &2 |
| 14 | Ref.-from and ref.-to lines needed to compare highest and lowest line &1 |
| 15 | Ref.-from and ref.-to lines must be greater than evaluate line &1 |
| 16 | Template &1, line number &2: Enter resolution instruction type |
| 17 | Template &1, line number &2: Enter valid resolution instruction type |
| 18 | Please enter a line number greater than 10. |
| 19 | Specify a template name |
| 20 | Line number &1: Charge type not specified |
| 21 | Line number &1: Enter a valid charge type |
| 22 | Line number &1: Maintain amount for calculation rule |
| 23 | Line &1: Enter amount, rate table template, or rate determination rule |
| 24 | Line number &1: Calculation rule and rate table template cannot co-exist |
| 25 | Line number &1: Enter amount or rate table template, but not both |
| 26 | Line number &1: Currency not specified |
| 27 | Line number &1: Currency should be % as charge type value is percentage |
| 28 | Line number &1: Enter a valid currency |
| 29 | Line number &1: Enter a valid op. code &2 for resolution instruction &3 |
| 30 | Line number &1: Enter a valid stage type |
| 31 | Line number &1: Enter a valid resolution base |
| 32 | Line number &1: Enter a valid rounding profile |
| 33 | Line number &1: Enter a valid adjustment profile |
| 34 | Line number &1: Calc. method &2/&3 is not compatible with resolution base |
| 35 | Line number &1: Calculation base does not have a scale base assigned |
| 36 | Line number &1: Invalid charge category &2 |
| 37 | Line number &1: Rate table template &2 not found |
| 38 | Line number &1: Rate table template &2 does not contain scale template |
| 39 | Line &1: Rounding profile &2 does not exist |
| 40 | Line &1: Rounding profile &2 does not have rounding rule assignment |
| 41 | Line &1, rounding profile &2: Rule index &3 does not have rule reference |
| 42 | Line &1, rounding profile &2: Enter a valid rule &3 in rule index &4 |
| 43 | Application level of rounding profile: &1/&2/&3: Invalid sign &4 |
| 44 | Application level of rounding profile: &1/&2/&3: Invalid option &4 |
| 45 | Application level of rounding prof: &1/&2/&3: High level &4 is not bigger |
| 46 | Rounding prof. &1: Rule &2 at index &3 does not have an application level |
| 47 | Line &1: Rounding rule &2 does not exist |
| 48 | &1: Valid-to date cannot be maintained w/o maintaining valid-from date |
| 49 | Line &1: Valid-from date falls after valid-to date |
| 50 | Line number &1: Charge types for item & rate table template do not match |
| 51 | Line no. &1: Charge usages for calc sheet & rate table tmpl. do not match |
| 52 | Line number &1: Currency not specified |
| 53 | Line number &1: Currency should be % as the value type is percentage |
| 54 | Line number &1: Invalid currency |
| 55 | Line number &1: Invalid operation code &2 for resolution instruction &3 |
| 56 | Line &1: Resol. base type &2 incompatible with header resol. base type &3 |
| 57 | Calc. resol. base &1 of referring item different to referred item &2: &3 |
| 58 | Line number &1: Operation code not permitted for standard instr. type |
| 59 | Line &1: Rte template has mult. charge types; allow multi. charge types |
| 60 | Item line no. &1 defined by ref.-to line of line &2; entry does not exist |
| 61 | Line no. &1: Reference-to line &2 is invalid |
| 62 | Reference-to line &1 is greater than or equal to item line &2 |
| 63 | Ref.-to line &1 is less than its corresponding ref.-from line &2 |
| 64 | Line no.&1: Corresponding reference-to item line required for charge type |
| 65 | Line no. &1: Corresponding ref.-to line &2 not expected for charge type |
| 66 | Line no. &1: Reference-from line number &2 is invalid |
| 67 | Item line &1 defined by ref.-from line of line &2; entry does not exist |
| 68 | Reference-from line &1 is greater than or equal to item line &2 |
| 69 | Line no. &1: Corresponding ref.-from line &2 not expected for charge type |
| 70 | Line no. &1: Corresponding reference-from line required for charge type |
| 71 | Line number &1: Sum line number 10 cannot be used in ref.-to line |
| 72 | Line number &1: Sum line number 10 cannot be used in Ref.-from line |
| 73 | Line &1: Rate table template and rate determination rule cannot co-exist |
| 74 | Line &1: Amount and rate determination rule cannot co-exist |
| 75 | Line &1: You cannot enter rate table template for manual amount |
| 76 | Line &1: You cannot enter rate determination rule for manual amount |
| 77 | Rate table tmpl. has a single charge type; disallow multi. charge types |
| 78 | Line no. &1: Allow multiple charge types or enter a charge type, not both |
| 79 | Line number &1: Enter a valid stage category |
| 80 | Line no. &1: Enter a valid calculation base |
| 81 | Line no. &1: Calculation base does not have a scale base assigned |
| 82 | Line no. &1: Invalid scale base for the calculation base |
| 83 | Line no. &1: Rate table template and item calc. rule should not co-exist |
| 84 | Line no. &1: Calc. base &2 not allowed with calc. rule in calc. sheet |
| 85 | Line no. &1: Amount expected for amount-based calculation rule |
| 86 | Line no. &1: Currency "%" expected for amount-based calculation rule |
| 87 | Line no. &1: Unit of measure not expected for amount-based calc. rule |
| 88 | Line no. &1: Price unit not expected for amount-based calculation rule |
| 89 | Line no. &1: Calculation base and UoM required for calculation rule |
| 90 | Line no. &1: Calculation base required for calculation rule |
| 91 | Line no. &1: Calculation base and quantity required for calculation rule |
| 92 | Line no. &1: Unit of measure required for calculation rule |
| 93 | Line no. &1: Calculation quantity and UoM required for calculation rule |
| 94 | Line no. &1: Calculation base &2 not allowed with calculation rule |
| 95 | Line no .&1: Price unit required for calculation rule |
| 96 | Line no. &1: UoM dimension and calculation base dimension do not match |
| 97 | Line number &1: Invalid shipping type |
| 100 | Only instr. type required for sum line &1; delete all other values |
| 101 | Only instr. type required for subtotal line &1; delete all other values |
| 102 | Line no. &1: Only std items can be subordinates of compare high/low items |
| 103 | Line no. &1: Calc. sheet and rate table template value type do not match |
| 104 | Line no. &1: Instruction type is "Compare High/Low Value"; enter op. code |
| 105 | Line &1: Charge type &2 is inactive |
| 106 | Line &1: Multi. charge types not permitted for "Compare High/Low Value" |
| 107 | Line number cannot contain non-numeric characters |
| 108 | Line &1: Charge due &2 is incompatible with charge type &3 |
| 109 | Line &1: Classification &2 is incompatible with charge type &3 |
| 110 | Line &1: table type and table template do not match for calc. sheet |
| 111 | Line number &1: Specify a business partner |
| 112 | Line number &1: Specify a related calculation base |
| 113 | Line no. &1: Line no. &2 is a std line item; it cannot be a parent line |
| 114 | Line no. &1: Parent line no. &2 does not exist |
Mesaj metinleri danışmanlık ve eğitim amaçlı teknik referans olarak gösterilir. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA ve diğer SAP ürün/hizmet adları SAP SE'nin veya bağlı şirketlerinin ticari markalarıdır.