/SCA/TSDM
115 mesaj (bu uygulama alanında)
Her satırda SAP mesaj numarası ve kaynak çıktısındaki İngilizce metin yer alır. Derin bağlantı için örn. #msg-123 kullanın.
| Mesaj | Mesaj metni |
|---|---|
| 0 | Time series data type &1 not active |
| 1 | Time profile &1 not found |
| 2 | Time series type &1 not found |
| 3 | Time series data type &1 not found |
| 4 | Time series data area &1 not found |
| 5 | Time profile &1 is already active |
| 6 | Time profile &1 is not defined consistently |
| 7 | Error when evaluating time profile &1 |
| 8 | Error when using factory calendar &1 |
| 9 | Time profile &1 successfully activated |
| 10 | Time series data area &1 not found |
| 11 | Activation of time series data area &1 cancelled |
| 12 | Time series data area &1 not valid |
| 13 | Time series data area &1 successfully activated |
| 14 | Time profile &1 not active |
| 15 | Error deleting table &1 of time series data area &2 |
| 16 | Time series data area &1 is active. Dependent data is deleted. |
| 17 | Cluster size &2 computed from time profile &1 is greater than maximum &3 |
| 18 | Data of time profile &1 was successfully deleted |
| 19 | Action cancelled |
| 20 | Time profile &1 used in time series data type &2. It cannot be deleted |
| 21 | No valid time series data area for type &1, version &2 and key figure &3 |
| 22 | Time from = &1 and time to = &2 is not a valid combination |
| 23 | Period ID &1 not valid |
| 24 | Cluster ID &1 not valid |
| 25 | Start date must be before or equal to end date |
| 26 | No locationproduct was specified |
| 27 | Key figure parameter is required to create data |
| 28 | Time series data area &1 is already active |
| 29 | Time series data type and dependent objects &1 successfully activated |
| 30 | Action cancelled |
| 31 | Start and end time of time profile &1 are not defined consistently |
| 32 | No period interval type defined |
| 33 | No cluster type defined |
| 34 | Time profile &1: cluster size &2 not consistent with period sequence num |
| 35 | Cluster multiplicity &2 of time profile &1 not valid |
| 36 | Period Interval Type "Time duration" allows only "Fixed size cluster" |
| 37 | Modus &1 of time series data type &2 not supported |
| 38 | Time series data type &1 successfully activated |
| 39 | Time series data type &1 successfully deleted |
| 40 | Error in data access: time series type &1, data type &2, time profile &3 |
| 41 | Time series data area &1 successfully deleted |
| 42 | Time series type not specified |
| 43 | No key figure specified |
| 44 | Call of TSDM without using Adapter |
| 45 | No target time series type specified for copy operation |
| 46 | Version &1 nicht gefunden |
| 47 | &1&2&3&4 |
| 48 | Version &1 not found |
| 49 | Time series data type &1 is already active in current form |
| 50 | Time series access for dates &2 to &3 is not possible for time profile &1 |
| 51 | Start time not specified |
| 52 | End time not specified |
| 53 | Key figure is initial |
| 54 | No location products specified |
| 55 | Time profile &1 has no duration specified to define time periods |
| 56 | Period from = &1 and period to = &2 is not a valid combination |
| 57 | Error in period mapping for external period &1. |
| 58 | System error: Time series data cannot be deleted with SET function |
| 59 | Data for time series type &1 successfully deleted |
| 60 | Time series data area not specified |
| 61 | Time series data successfully copied |
| 62 | Data tracking not enabled |
| 63 | No characteristic objects specified |
| 64 | Source version not specified |
| 65 | Source key figure not specified |
| 66 | Multiple data areas defined for characteristic value &1& |
| 67 | Time series data type not specified. |
| 68 | Time profile &1 has an active version and cannot be deleted here. |
| 69 | Active version of time profile &1 cannot be deleted in this transaction. |
| 70 | Either date from and date to or number of days must be specified |
| 71 | Input data not sufficient to write time series of type &1. |
| 72 | Time series data sucessfully changed |
| 73 | Time series data sucessfully deleted |
| 74 | Partner not found |
| 75 | Ship-from location not found |
| 76 | Select fiscal year variant for time profile &1 |
| 77 | "Fiscal year variant" allows only cluster type "Fixed size cluster" |
| 78 | History data for time series type &1 successfully deleted |
| 79 | Database table names for time series data area &1 already exist |
| 80 | Error when evaluating time profile |
| 81 | Time series data area &1 already exists |
| 82 | No location-product found |
| 83 | No time series keys for third key found |
| 84 | Start time of time profile adjusted to active time profile's start time |
| 85 | End time of time profile adjusted to active time profile's end time |
| 86 | Deletion parameters not selected. Deletion is not performed. |
| 87 | History entries deletion failed. |
| 88 | Version Number &1 |
| 89 | Key Figuer &1 |
| 90 | Location for First Key &1 |
| 91 | Product Number (Second Key) &1 |
| 92 | Location for Third Key &1 |
| 93 | Partner for Third Key &1 |
| 94 | Date From &1 |
| 95 | Date To &1 |
| 96 | Number of Days in Past &1 |
| 97 | Delete Key Figure Data checkbox &1 |
| 98 | Delete Status Data checkbox &1 |
| 99 | Change History Data Deletion checkbox &1 |
| 100 | Table &2 cannot be read in system &1 |
| 101 | Data Area &1 used for &2 versions: time series data will be overwritten |
| 102 | Time series data area &1 not copied (see note 908369) |
| 103 | Client copy of time series data areas (see note 908369) |
| 104 | Error in characteristic parameter mapping |
| 105 | Error with planning object structure |
| 106 | Dimensions must be continuous with no gaps |
| 107 | Invalid package size |
| 108 | Time series data area scope for version &1 not found |
| 109 | You can only delete internal key figures |
| 110 | No time Series data exists for the selection. |
| 111 | Parameter &1: provided value is invalid |
| 112 | Consistency check finished |
| 113 | History data for TS type &1 deleted (Key Figure: &2; State: &3) |
| 114 | History data for time series type &1 not found; no data deleted |
Mesaj metinleri danışmanlık ve eğitim amaçlı teknik referans olarak gösterilir. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA ve diğer SAP ürün/hizmet adları SAP SE'nin veya bağlı şirketlerinin ticari markalarıdır.