/SCA/TLB
77 mesaj (bu uygulama alanında)
Her satırda SAP mesaj numarası ve kaynak çıktısındaki İngilizce metin yer alır. Derin bağlantı için örn. #msg-123 kullanın.
| Mesaj | Mesaj metni |
|---|---|
| 1 | All bounds exceeded without finding valid load using TLB profile &1 |
| 2 | No active BADI implem. for calcul. of base quantities out of parameter &1 |
| 3 | No active BADI implementation for calculation of parameter &1 |
| 4 | Product &1 could not be converted from unit &2 to pallet type &3 unit &4 |
| 5 | Product &1 could not be converted from unit &2 into unit &3 |
| 7 | No further upsizing possible - not all demands converted into valid loads |
| 8 | The number of valid loads decreased during downsizing |
| 9 | No further upsizing possible - shipment quantity will be downsized |
| 10 | Downsizing resulted in no TLB shipment |
| 11 | The number of TLB shipments increased by more than one during upsizing |
| 12 | No timeseries data available for TSTP &1, Semantic &2 |
| 13 | Missing lane master data (transportation lane from &1 to &2, MTr &3) |
| 14 | More TLB shipments (&1) than appointments (&2) on &3 at &4 |
| 15 | Transport Load Builder started for lane from &1 to &2, MTr &3, profile &4 |
| 16 | Load building started for period from &1 &2 to &3 &4 |
| 17 | Upsizing rounding value wise |
| 18 | Downsizing rounding value wise |
| 19 | Load building successfully executed for period from &1 &2 to &3 &4 |
| 20 | Building loads rounding value wise |
| 21 | Building loads capacity wise |
| 22 | PSM Service Profile &1 for Transport Load Builder does not exist |
| 23 | No pallet or pallet unit assigned to product &1, src.loc. &2, dst.loc. &3 |
| 24 | Upsizing using binary search |
| 25 | Downsizing using binary search |
| 26 | &1 valid loads built with &2 rounding value multiples remaining |
| 27 | &1 valid loads built without remaining quantities |
| 28 | &1&2&3&4 |
| 29 | Redistribution step |
| 30 | End of load building run |
| 31 | Not all TLB demands of product &1 at &2 in per. &3 conv. in TLB shipments |
| 32 | TLB demand of prod. &1 of period &2 converted into TLB shipmt. in per. &3 |
| 33 | Sizing process was stopped before valid solution was reached |
| 34 | No TLB profile maintained at transp.lane from &1 to &2, MTr &3 |
| 35 | Location product &1 &2 not found in version &3 |
| 36 | Cutting remaining quantity since it containes only upsized quantities |
| 37 | Upsizing last TLB shipment only (rounding value wise) |
| 38 | Timeseries type &1 not found |
| 39 | &3 TLB shipments without appointment at destination location &1 at &2 |
| 40 | Not all promotion dem. of prod. &1 at &2 in per. &3 conv. in TLB shipm. |
| 41 | Promotion dem. of prod. &1 of period &2 conv. into TLB shipm. in per. &3 |
| 42 | Not all locked dem. of prod. &1 at &2 in per. &3 conv. in TLB shipments |
| 43 | Locked dem. of prod. &1 of period &2 converted into TLB shipm. in per. &3 |
| 44 | No TLB demands found for selected products on lane from &1 to &2, MTr &3 |
| 45 | No products found at location &1 with sufficient authorization |
| 46 | Direct shipment created on lane from &1 to &2, MTr &3 |
| 47 | Remain. qty is TLB profile &1 compliant using order tolerance factor &2 |
| 48 | Non rule compliant load created with critical demands |
| 49 | Downsizing not successful |
| 50 | Downsizing decision because order tolerance &1 not reached by remain. qty |
| 51 | Downsizing decis. because thresh. &1 not reached by remain. qty ratio &2 |
| 52 | Upsizing decision because threshold &1 exceeded by remaining qty ratio &2 |
| 53 | Downsizing decision because upsizing was not successful |
| 54 | Building finished after &1 steps including &2 reverse steps |
| 55 | Created &1 TLB shipments containing &2 rounding value multiples |
| 56 | &1 demands with &2 rounding value multiples |
| 57 | Upsizing canceled because of maximum number of upsizing steps &1 exceeded |
| 58 | Upsizing finished in &1 steps |
| 59 | Downsizing by removing remaining quantities |
| 60 | No entry in basic settings table found with key &1 |
| 61 | Do not mark multiple entries as default |
| 62 | TLB run for lane &1 to &2 MTr &3 cancelled because of missing allocations |
| 63 | Decision for downsizing based on upsizing costs &1, downsizing costs &2 |
| 64 | Decision for upsizing based on upsizing costs &1, downsizing costs &2 |
| 65 | No cost profile for product &1, location &2 maintained |
| 66 | No replenishment orders found for transp.lane from &1 to &2, MTr &3 |
| 67 | Hierarchy &2 is not assigned to model &1 |
| 68 | Demand of product &1 at src.loc. &2 filtered, not active for shipp. on &3 |
| 69 | Demand of product &1 at dst.loc. &2 filtered, not active for deliv. on &3 |
| 70 | Skipped upszd. demand of prod. &1 at &2 from &3 due to unnescessary loads |
| 71 | Skipped ups. demand of prod. &1 at &2 from &3 due to skipped param. range |
| 72 | Upsizing finished successfully in &1 steps including &2 skipping steps |
| 73 | &1 valid loads built with "fast" method |
| 74 | Weight or volume parameters are missing from TLB profile &1 |
| 75 | Upper limit of weight or volume parameters is missing from TLB prof. &1 |
| 76 | Quantity of product &1 is below the minimum lot size on date &2 |
| 77 | Quantity of product &1 is above the maximum lot size on date &2 |
| 78 | Parameter MIXEDPAL can not be used without allow mixed pallets setting |
Mesaj metinleri danışmanlık ve eğitim amaçlı teknik referans olarak gösterilir. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA ve diğer SAP ürün/hizmet adları SAP SE'nin veya bağlı şirketlerinin ticari markalarıdır.