/SCWM/UI_PACKING
240 messages dans cette zone
Chaque ligne affiche le numéro de message et le texte anglais. Liens profonds avec #msg-123.
| Message | Texte du message |
|---|---|
| 0 | ** |
| 1 | Select a valid entry |
| 2 | Partial quantity is larger than total quantity |
| 3 | Select one line only |
| 4 | HU &1 transferred to bin &2 |
| 5 | Storage bin & does not exist in warehouse number & |
| 6 | Work center &3: Storage bin &1 does not fit storage type &2 |
| 7 | & is not a packaging material. Enter a valid packaging material |
| 8 | Errors occurred. See log for details |
| 9 | Product & is not in HU & |
| 10 | HU &1 moved on resource &2 |
| 11 | Enter a valid quantity |
| 12 | Product & repacked |
| 13 | Product & packed |
| 14 | HU is packed |
| 15 | Product & unpacked |
| 16 | HU & is in an unconfirmed warehouse task |
| 17 | 'Customs Block' status set for HU &1 |
| 18 | Warehouse task & confirmed |
| 19 | Data has changed. Action not possible |
| 20 | Product or packaging material &1 does not exist |
| 21 | 'Customs Block' status deleted for HU &1 |
| 22 | You must enter a storage type for the storage section |
| 23 | Select either by storage bin or by storage type and section |
| 24 | Could not determine a valid work center layout |
| 25 | Enter a valid identification |
| 26 | Open warehouse task for HU & on bin &; No changes possible |
| 27 | Quantity entered is larger than warehouse task quantity |
| 28 | Could not find an object for the entry |
| 29 | Batch & does not exist |
| 30 | Could not find handling unit &1 |
| 31 | Object & is not part of this handling unit |
| 32 | Could not find a unique destination HU |
| 33 | Could not find product item |
| 34 | There is more than one item for this product |
| 35 | Enter a handling unit first |
| 36 | Complete your entry |
| 37 | Quantity to pack is larger than the open quantity |
| 38 | Error during conversion of units of measure |
| 39 | Work center &1 does not exist in warehouse number &2 |
| 40 | No work center found in warehouse &1, storage type &2, bin &3 |
| 41 | No work center found in warehouse &1, storage type &2, section &3 |
| 42 | Could not determine a RFC destination &2 for scales &1 |
| 43 | Error during weighing. No weight was transmitted |
| 44 | One line is already open. You cannot create any more lines |
| 45 | No repacking allowed in the storage bin |
| 46 | No warehouse task found |
| 47 | The stop for the route is different in the source and destination HU |
| 48 | When you enter a batch, you must also enter a product |
| 49 | An error has occurred (probably a program error) |
| 50 | Exception code is not valid |
| 51 | There are open HU WTs; Repacking only possible via WT |
| 52 | Enter either a source HU or a bin |
| 53 | Enter a source HU |
| 54 | Enter either a product or a warehouse task |
| 55 | Enter either a destination HU or a bin |
| 56 | Enter a product |
| 57 | You have not entered a difference |
| 58 | Could not post difference. See log |
| 59 | You can only use storage types with role B, C, E, I, H, or K. |
| 60 | You cannot repack auxiliary packaging materials |
| 61 | Empty HUs will be deleted when you save |
| 62 | Maximum number of WTs reached; Close the HU |
| 63 | HU is not in the work center. You cannot make changes |
| 64 | There are open product warehouse tasks; No repacking possible |
| 65 | HU & is not a planned HU. You cannot make changes |
| 66 | Items with no warehouse process type must not be packed |
| 67 | Storage process is different for HU and item |
| 68 | No storage bins found |
| 69 | No deliveries found |
| 70 | No unique item found |
| 71 | No direct changes allowed to status & |
| 72 | Subsequent WT created. Repacking only possible after saving |
| 73 | HU is not nested. Aggregation is not possible. |
| 74 | Item &1 does not belong to a VAS, no VAS warehouse task possible |
| 75 | VAS warehouse task &1 was created |
| 76 | First enter the HU |
| 77 | WT does not point to work center. Confirmation not possible |
| 78 | Delivery item was not found |
| 79 | Parameters are not consistent |
| 80 | HU contains inbnd and outbnd deliveries. Delivery display not possible |
| 81 | Hu contains no delivery item. Delivery display not possible |
| 82 | Item is not assigned to any delivery. Delivery display not possible |
| 83 | Input does not permit specific selection |
| 84 | Cannot display a delivery for this object type |
| 85 | There are open warehouse tasks, no VAS WT possible |
| 86 | Quantity is less than number of serial numbers entered |
| 87 | Serial number was already entered |
| 88 | Serial number was not yet entered |
| 89 | You have already specified all serial numbers |
| 90 | This serial number may not be entered |
| 91 | Serial number is not assigned |
| 92 | You do not need to enter serial numbers to unpack |
| 93 | Not possible to assign serial numbers to this item |
| 94 | You have not entered enough serial numbers |
| 95 | Not all deliveries in this HU are blocked. Changes are not possible |
| 96 | Could not select a delivery |
| 97 | Could not block all deliveries (see log) |
| 98 | Could not block delivery &1 |
| 99 | Enter an existing batch for the product |
| 100 | No spool parameter for warehouse &1 work center &2. Print canceled |
| 101 | Delivery note was printed |
| 102 | Select one item |
| 103 | Module was not called correctly |
| 104 | You have selected objects that cannot be deleted in the tree |
| 105 | No delivery found |
| 106 | Delivery item does not exist |
| 107 | No serial numbers can be entered for this delivery item |
| 108 | Only HUs with consistent route stop can be repacked |
| 109 | Kit can only be repacked on HU |
| 110 | Enter a storage bin |
| 111 | HU is not yet in warehouse and therefore cannot be processed |
| 112 | No wave found |
| 113 | Work center layout &1 in warehouse number &2 does not exist |
| 114 | Selected work center does not fit the transaction |
| 115 | Open inactive HU WT exists. Repacking not possible |
| 116 | HU &1 has warehouse process step &2. No VAS warehouse task possible |
| 117 | Serial numbers are assigned. Entering a partial quantity not possible |
| 118 | Item is assigned to a different door than the contents of the HU |
| 119 | Content of dest. HU is assigned to different door than HU being packed |
| 120 | Repacking in or from a resource not possible |
| 121 | First enter a HU or storage bin |
| 122 | No item found for this material |
| 123 | Unable to input differences here |
| 124 | Specify an unpacked product with an open quantity greater than zero |
| 125 | GR-posted items exist; packing only possible with restrictions |
| 126 | Cannot pack products subject to batch management requirent without batch |
| 127 | HU without TO must not be repacked on tab page 'Deconsolidation' |
| 128 | Unable to find a warehouse task |
| 129 | Errors occurred. See log |
| 130 | Only HUs with storage process can be completed |
| 131 | Open warehouse tasks exist for HU &1. Changing not possible |
| 132 | Warehouse process not suitable for GR storage bin in delivery item &1 |
| 133 | Inbound delivery was created in a separate queue |
| 134 | Delivery item is not locked. Repacking not possible |
| 135 | No catch weight product. Entering valuation quantity not possible |
| 136 | You must save first |
| 137 | No product could be found |
| 138 | No product could be found |
| 139 | First enter an object to be weighed |
| 140 | Valuation quantity for HU &1, product &2 is not exact |
| 141 | Valuation quantity entry is missing; see log for details |
| 142 | Valuation quantity entry is missing even though it must be exact |
| 143 | Unpacking not allowed; goods movements without HU were performed |
| 144 | No destination storage type exists for work center determination |
| 145 | Batch will be deleted, as product is not subject to batch management |
| 146 | This type of work center is not supported |
| 147 | Creating multiple HUs only possible without specifying identification |
| 148 | Repacking in final storage bin is not allowed |
| 149 | Open warehouse tasks already exist; creation not possible |
| 150 | Destination is not located at work center; repacking not possible |
| 151 | HUs were changed; refreshing is not allowed |
| 152 | First enter an HU on the 'Change HU' tab page |
| 153 | Deletion of HU with open warehouse task not allowed |
| 154 | for HU &1 unprocessed queues exist. Closing not allowed |
| 155 | HU is being put away; completion not possible |
| 156 | HU is not at this work center; completion not possible |
| 157 | An error occurred while updating the database |
| 158 | VAS functions only allowed with transaction type 8 |
| 159 | Qual. inspection and Counting only possible with transaction type 3 |
| 160 | Open WTs exist! Check Return transfer being created |
| 161 | Changing the identification with type "C" is not allowed |
| 162 | HU &1 is a planned HU; you can only change it in the delivery screen |
| 163 | Quitting of storage control only allowed for internal moves |
| 164 | Quitting of storage control only allowed for top HU |
| 165 | Open warehouse tasks exist for HU; deletion of HU not possible |
| 166 | You cannot delete the HU due to open warehouse tasks |
| 167 | Assignment of serial numbers only possible for complete quantity |
| 168 | After repacking, SNs are only partially assigned to the target stock |
| 169 | Delivery &1 belongs to warehouse number &2. Packing not possible |
| 170 | Differences cannot be posted for HU warehouse tasks |
| 171 | Deletion of HU which is a assigned to a WHO not allowed |
| 172 | You do not have authorization for this action in Warehouse &1 |
| 173 | It is not possible to unpack a top-HU |
| 174 | Enter a delivery item |
| 175 | Enter a destination HU |
| 176 | The delivery item is not packed into HU &1 |
| 177 | Delivery &1 does not exist |
| 178 | Delivery item &1 does not exist |
| 179 | Empty HUs cannot be used as collective HUs |
| 180 | HU &1 does not belong to the selected deliveries |
| 181 | HU &1 has reference to a collective HU. Packing is not allowed |
| 182 | HU &1 is a collective HU. Packing is not allowed |
| 183 | A collective HU cannot have a storage process with an unloading step |
| 184 | It is not allowed to complete a process step for a collective HU |
| 185 | Exact conversions is not possible. Enter quantity in Base unit of measure |
| 186 | 'Include Empty HU' Flag is not considered without the HU selection data |
| 187 | Repack HU: Source HU and Destination HU should be different |
| 188 | It is not allowed to fill the field "&1" for Planned Shipping HUs |
| 189 | Enter a quantity |
| 190 | Item quantity of HU &1 is not equal to the number of serial numbers |
| 191 | You cannot use HU &1 as destination for items relevant to order reduction |
| 192 | Handling unit &1 contains products relevant to order reduction |
| 193 | Scale integration is not supported |
| 194 | HU &1 is unloaded. No further changes possible - post GR or cancel unload |
| 195 | HU not deleted. Quantity for delivery items is not adjusted. |
| 196 | &1 HUs deleted. |
| 197 | &1 items not processed. Quantity roles PAN, or PA, or both are missing. |
| 198 | HU deletion is not allowed for items with serial numbers. |
| 199 | Check settings for item type &1/ &2 |
| 200 | ========== Kit-Specific Messages ======================== |
| 201 | HU contains more kits than components |
| 202 | HU does not contain all items of the kit |
| 203 | Kit header items exist; movement or posting change is not allowed |
| 204 | Unable to record differences for kits |
| 205 | Unable to determine quantities for kit |
| 220 | ========== SUOM-Specific Messages ======================== |
| 221 | Adjustment of existing HU's failed, Change will lead to data inconsist. |
| 222 | After Changing of existing HU's there is a remaining unpacked QTY |
| 250 | Delivery &1 Item &2 is unloaded - post GR or cancel unload |
| 251 | HU could not be deleted due to existing auxiliary packaging material |
| 300 | ******** Error messages from HU selection ************** |
| 301 | Entering stock ID and other parameters is not possible |
| 302 | Serial number selection not possible without a product |
| 303 | Error in quantity conversion product &1 old qty &2; see SAP Note 1045952 |
| 304 | UoM &1 is neither SUoM-relevant nor the base UoM |
| 340 | ========== DMAG Exception-Specific Messages ======================== |
| 341 | You can use the exception code only where there is no HU requirement |
| 342 | Could not find stock after unpacking |
| 400 | =============== Transit Warehouse specific messages ===================== |
| 401 | Packing into Transit warehouse HU not allowed. |
| 402 | No Transit Warehouse HU |
| 403 | Goods receipt posted for handling unit &1; deletion not possible |
| 404 | Mix of transit HUs and normal HUs in HU-hierarchy is not allowed |
| 405 | Selection contains Transit Warehouse HUs. Changing not possible |
| 406 | Transit HUs in the warehouse cannot be deleted |
| 407 | An error has occurred (probably a program error). HU &1 |
| 450 | ========= Specific messages for Advanced Shipping and Receiving ========= |
| 451 | HU change not allowed. Mix of Adv. SR deliveries and other deliveries. |
| 452 | HU change not allowed. At least one of the del. is not rdy for whse proc. |
| 453 | Cross-delivery HU not allowed. Del. &1 is an Adv. SR delivery. |
| 454 | Change capacity of HU &1 not allowed. Deliveries are ready for shipping. |
| 500 | Unique item identifier has been entered more than once |
| 501 | This unique item identifier cannot be entered here |
| 502 | Unique item identifier has not been entered |
| 503 | Combination of serial number and UII has not been entered |
| 504 | All unique item identifiers have been entered |
| 505 | All serial numbers and unique item identifiers have been entered |
| 506 | You have not entered enough serial numbers and unique item identifiers |
| 507 | Open pack quantity is exceeded. |
Les textes sont fournis à titre de référence technique. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA et autres noms sont des marques de SAP SE.