/SCMTMS/PLN_FUB
63 messages dans cette zone
Chaque ligne affiche le numéro de message et le texte anglais. Liens profonds avec #msg-123.
| Message | Texte du message |
|---|---|
| 0 | *** General Messages and Info *** |
| 1 | &1 &2 &3 &4 |
| 2 | &1 document(s) created |
| 3 | No documents adjusted - nothing relevant changed |
| 4 | &1 document(s) updated |
| 5 | Stops of &1 adapted |
| 6 | Times of &1 adapted |
| 7 | Freight unit building rule of &1 adapted |
| 8 | Incompatibility &1 (&2) violated |
| 9 | Split error while adding &1 to &2 because of UoM &3 |
| 10 | Equipment of &1 adapted |
| 11 | ACS data was not copied to new freight unit &1; maintain it manually |
| 100 | *** Errors *** |
| 101 | Internal error; freight unit building failed &1 |
| 102 | Freight unit building failed &1 |
| 103 | Configuration error: Wrong request object used |
| 104 | At least one item has no start stop |
| 105 | At least one item has no destination stop |
| 106 | Transportation request &1 (item &2) has no source stop |
| 107 | Transportation request &1 (item &2) has no destination stop |
| 108 | No location assigned to stop &1 of transportation request &2 (item &3) |
| 109 | No freight units created for item &1 |
| 110 | Quantity &1 not found |
| 111 | Freight unit building rule &1 not found |
| 112 | &1: Item &2 has no stage information |
| 113 | Invalid target |
| 114 | Cannot remove &1; element was passed by calling application |
| 115 | Cannot merge &1 &2 (&3) with &4; stops are not the same |
| 116 | Cannot merge &1 &2 (&3) with &4; FUB rules are not the same |
| 117 | &1 &2 is incompatible with items of &3 |
| 118 | Cannot merge &1 &2 with &3; capacity exceeded |
| 119 | Cannot split &1 &2; FUB rule settings violated |
| 120 | Cannot split &1 &2 - item type does not allow splitting |
| 121 | Hard constraint "&1" violated |
| 122 | Cannot split &1 &2 &3; conversion to planning quantity not possible |
| 123 | Cannot split &1 &2; freight unit building rule does not allow splitting |
| 124 | &1 has been canceled |
| 125 | Quantity must not be initial |
| 126 | Unit of measure must not be initial |
| 127 | Split quantity must not be initial |
| 128 | Invalid unit of measure &1 for split quantity &2 |
| 129 | Invalid split quantity &1 |
| 130 | Invalid unit of measure &1 |
| 131 | Merge not possible, consolidation not allowed |
| 132 | Cannot merge &1 &2 (&3) with &4; times are not identical |
| 133 | Target is invalid |
| 134 | Cannot merge &1 &2 (&3) with &4; equipment is not the same |
| 135 | Item changes were not propagated into &1 |
| 136 | Freight unit builder (&2) does not support items with category &1 |
| 200 | *** Warnings *** |
| 201 | Assigned freight unit building rule not found; default rule applied |
| 202 | Item &1 of &2 was removed from &3; no planning-relevant quantity exists |
| 203 | FUB rule &1 was assigned automatically; rule only to be assigned manually |
| 204 | Could not determine number of decimal places for &1 |
| 205 | FUB failed for item &1 of &2; no planning-relevant quantity exists |
| 206 | Freight unit building failed for item &1 of &2; no quantity exists |
| 207 | All schedule lines of &1 were removed; no confirmed schedule lines exist |
| 208 | All schedule lines of &1 were removed; no requested schedule lines exist |
| 209 | Incoterm of &1 (&2) cannot be added in stop sequence |
| 210 | &1 has already been added |
| 211 | Split quantity exceeds the total item quantity; whole item is moved |
| 212 | Stops of actual route are not copied for some created freight units |
| 213 | Target selection is invalid for the requested change |
Les textes sont fournis à titre de référence technique. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA et autres noms sont des marques de SAP SE.