/SCWM/LK
117 Meldungen in diesem Anwendungsbereich
Jede Zeile enthält Meldungsnummer und englischen Text. Deep Links z. B. mit #msg-123.
| Meldung | Meldungstext |
|---|---|
| 1 | No function module defined for message type & |
| 2 | No definition of communication relationship for message type & |
| 3 | Transmission system not defined for link WM -> subsystem |
| 4 | No receiver found for message type & |
| 5 | Internal error during determination of relevant WTs for link to subsystem |
| 6 | No receiver defined for target system & |
| 7 | Segment & is not defined in IDOC (check IDOC syntax) |
| 8 | Multiple processing of IDOCs terminated; error during IDOC & |
| 9 | Inconsistency of data in the individual IDOC segments |
| 10 | Status of IDOCs & not determined |
| 11 | Parameters of return table for IDOC & not determined |
| 12 | Message type & cannot be processed in selected function module |
| 13 | No target system found for the WT item to be canceled |
| 14 | Message type "cancellation request" is not active for variant & |
| 15 | IDOC can only contain data from a warehouse task |
| 16 | For warehouse number &, link to external system is not activated |
| 17 | TR change not possible; reference to TR number missing |
| 18 | Transfer requirement & & does not exist |
| 19 | Inconsistency of data in segments /SCWM/E1LTCOX and /SCWM/E1LTCOH |
| 20 | Consistency problem: either block or unblock |
| 21 | Consistency problem: blocking entry already exists |
| 22 | Consistency problem: whse number / stor.type combination does not exist |
| 23 | Consistency problem: warehouse number authorization missing |
| 24 | Internal error occurred during update to LAGP. Contact system supervisor |
| 25 | Check your entries |
| 26 | Receiving and transmitting systems must be entered |
| 27 | Selection does not generate an IDOC |
| 28 | For confirmation of single items, you must select the WT number |
| 29 | Transfer requirement item to be cancelled cannot be found |
| 30 | For entering count data in storage type &, the SU number is required |
| 31 | Specify a unit of measure for the counted quantity |
| 32 | Check your entry. No inventory number found for storage bin & |
| 33 | Inventory count data could not be transferred |
| 34 | Transfer all data to function module L_INV_COUNT |
| 35 | Inventory number currently blocked by another user |
| 36 | Check your entries. Inventory count already complete or not available |
| 37 | Check your entries. Inventory number does not match storage bin |
| 38 | Either set the indicator for bin empty or a quantity |
| 39 | New entry required. Inventory number(s) not for inventory count |
| 40 | Inconsistency of data in segments /SCWM/E1LTCOX and /SCWM/E1LTCOI |
| 41 | Inconsistency of data in segments /SCWM/E1LTCOH and /SCWM/E1LTCOI |
| 42 | WT item & & is not intended for link to subsystem |
| 43 | No open WT items for confirmation by system & |
| 44 | Cancellation not possible: &&&& |
| 45 | Cancellation not possible: &&&& |
| 46 | In IDOC, no cancellation activated |
| 47 | Material movement could not be posted in the system |
| 48 | Several warehouse tasks in one IDOC for WT confirmation not possible |
| 49 | No authorization for transfer requirement change (Transaction LB02) |
| 50 | &1&2&3&4 |
| 51 | No authorization for transfer requirement creation (Transaction LB01) |
| 52 | Call update task only in connection with COMMIT WORK |
| 53 | To cancel transfer requirement, specify the reference number |
| 54 | Detailed display not possible at this level |
| 55 | Several inventory numbers cannot be processed simultaneously |
| 56 | Several recount versions per inventory number not allowed simultaneously |
| 57 | Double count records cannot be processed via the interface |
| 58 | New selection. No data was found for the parameters entered. |
| 59 | Segment E1MBXYJ could not be assigned to segment E1MBXYI |
| 60 | Segment E1LTCOG is in the wrong sequence or has the wrong WT number |
| 61 | Incorrect control of two-step confirmation in WCU interface |
| 62 | Separate confirmation with indicator '&1' triggered, '&2' is allowed |
| 63 | Either /SCWM/E1LTCOH or /SCWM/E1LTCOX has to be filled |
| 64 | Actual=target confirmation (SQUIT = X) with SN specification not possible |
| 65 | No means of transport found for packaging material &1 |
| 70 | Entry combination is not allowed. Select again. (Material reorganization) |
| 71 | There are no table entries in T320 (material reorganization) |
| 72 | Wrong form & was used for printing (posting change warehouse tasks) |
| 73 | Plant/storage location/warehouse number combination is incorrect |
| 74 | Several WTs with the KOMIM switch within one IDoc are not allowed |
| 80 | Consistency problem: storage bins not maintained, or storage type wrong |
| 100 | Warehouse order &1 does not exist |
| 101 | Warehouse order &1 does not contain any open warehouse tasks |
| 102 | Error while reading activity area &1 |
| 103 | Error while reading storage bin &1 |
| 104 | Error while changing HU attributes of HU &1 |
| 105 | Warehouse number and warehouse order must be transferred |
| 106 | Either the HU number of the packaging material must be transferred |
| 107 | IDocs can only be transferred for a warehouse number |
| 200 | IDoc data for creation of vehicle and TU is not correct |
| 201 | ERP shipment &1 already assigned to TU &2 / activity &3 |
| 202 | TU for delivery assignment &1 / &2 not found |
| 203 | IDoc segment E1EDT20 with number &1 already received |
| 204 | IDoc segment E1EDT20 with number &1 is missing |
| 205 | No mapping entries found for business system &1 and ERP partner role &2 |
| 206 | Partner roles not unique for business system &1 and ERP partner role &2 |
| 207 | No partner found for external number &1 and type &2 |
| 208 | No unique partner found for external number &1 and type &2 |
| 209 | Loading start (&1) is later than loading end (&2) |
| 210 | Planned start (&1) is later than planned end (&2) |
| 211 | External product &1 from system &2 could not be converted |
| 212 | No means of transport determined based on standard code &1 |
| 213 | IDoc segment E1EDL20 for delivery &1 already received |
| 214 | Reference not found for ERP delivery &1 from system &2 |
| 215 | Different direction of S&R activity (&1 / &2) within one IDoc |
| 216 | Delivery &1 is already assigned to TU &2 activity &3 |
| 217 | Mapping of logical system &1 to business system failed |
| 218 | Mapping of logical system &1 to business system is not unique and failed |
| 219 | No header information found |
| 220 | No vehicle and TU information found |
| 221 | No delivery information found |
| 222 | Warehouse number could not be determined from delivery |
| 223 | Transportation planning type &1 is not supported |
| 224 | Shipment reference missing |
| 225 | Outbound processing of IDoc & is not possible |
| 226 | Data container for PPF action &1 is not filled |
| 227 | Logical system must not be initial |
| 228 | IDoc message type must not be initial |
| 229 | Default values not maintained for business system &1 and message type &2 |
| 230 | Shipment type must not be initial |
| 231 | Transportation planning point must not be initial |
| 232 | HU &1 could not be clearly identified as a TU or a vehicle |
| 233 | Mapping of TU Route to the ERP system is not possible |
| 234 | Business system key must not be initial |
| 235 | Delivery &1 is blocked |
| 236 | Error during reading delivery &1 |
| 237 | Error during updating delivery &1 |
Meldungstexte dienen als technische Referenz in Beratung und Schulung. SAP, SAP TM, SAP EWM, SAP GTS, SAP S/4HANA und andere Produktnamen sind Marken der SAP SE.